Product information

Widen and enlarge

Various angle adjustment

Only the quick release version has two adjustment knobs

Using pp material

Not easy to break

Fits the shape of the wheel

Repel water and dirt without hindering riding

Waterproof and antifouling

easy to clean

Quick release design

Quick release knob, no tedious steps (quick release only)

Accessories list

Expansion plug

24-inch fenders are suitable for fork holes with an inner diameter of 18-24mm
The quick release version is suitable for fork holes with an inner diameter of 19-36mm

Quick Release - Front Fender Installation Steps

1. Install long screws and washers
2. Install a suitable expansion plug according to the diameter of the front fork
3. Install the expansion plug into the front fork hole
4. Tighten the screws, expand the expansion plug, clamp the front plug, and the installation is complete

Quick Release - Rear Fender Installation Steps

1. Install the limit accessories
2. Tighten the screw with an Allen tool
3. Align the quick release connector with the seat post
4. After tightening the quick release screws, the clamping installation is completed

24 inch model - front fender installation steps

1. Link the front fender connecting piece with the expansion plug
2. Install the gasket
3. Install the expansion plug into the front fork hole and tighten the screw
4. Connect the front fender and the insert to complete the installation

24 inch model - rear fender installation steps

1. Put the washer on the seatpost
2. Connect the connecting seat to the seat post
3. Tighten the screws
4. Installation is complete